PSCD 10 kV Marine (Ocean Platform) Transformer

All marine transformers are built in accordance with the technical requirements of the I.E.C publication 92,which is appvoved by ZC.

Standard:CB/T1001,GB6450,GB1094,GB/T10228,IEC92,CCSrules and Regulations for the Consturction and Classifications of Seagoing Steel

Capacity Range:0.5 to 1600kVA

Frequency: 50 or 60 HZ

Primary Voltage: 400 or 450 V

Secondary Voltage: 230 or 115 V

SCCD PSCD series epoxy resin cast dry type marine transformers (offshore platform) (Below called as "dry transformer" in brief) is a new generation of dry transformer. Which produced by the epoxy-resin casting advanced technologies. It has excellent performance and reliable quality. itsconstruction is most advanced internally,has achieved the international level of 1990s.
     Company began to product dry transformers since the end of 1970s.The product has gone through the first generation of thick insulation to the second generation of pure resin thin isolation and then to the third generation of thin-isolation-filled model. The coils of thick insulation is poor in anti-inflaming, partial discharging, heat-elimination and mechanical strength.
     The product has overcome all the defects of the predecessors. They perform better than before in heat-elimination, anti-inflaming, mechanical strength, anti-short circuit, partial discharging, noise control, appearance, energy-saving. They are welcomed and popular among the customers.
It is suitable for various major projects in urban power grid construction and other special conditions. It has been widely used in airports, power plant stations, docks, industries, platforms, power communication, institutes, accommodation areas and business centers.

Technical Specification:
1.Standard:GB6450,GB1094,GB/T10228,IEC60076

2.Capacity Range:50 to 100000KVA

3.Tappping Range:±5percent or±2×2.5 percent (or in accordance with customer's requirement)

4.Voltage class:3 to 35kv

5.Frequency:50HZ or 60HZ

6.Phase numble :3 phase or single phase.

7.Vection Group:Yyn0;Dynll(or in accordance with customer's requirement)

8.Impedance Voltage :standard Impedance (see performance parameters)

9.Cooling methods:Natural Air cooling or Force Air cooling

10.Insulation level:F or H (or In accordance with customers requirement)

11.Insulation Level:
Voltage class 1F withstanding Voltage Light Impulse high voltage
3KV        18KV           40KV
6kV         10KV          25/35KV 60/75KV
35KV       70KV          170KV
12Protection class:IP00,IP20,IP22,IP23

12.Protection Class:IP00 IP20 IP22 IP23

13.Environment Conditions:
Altitude  <=1000 meters
Environmental temperature  <=45
Relative hunidity  <=95

Relative Humidity
Could be effected by those elements: fogging, salt & oil spray, mildew etc.